主要出版物
1.A Coupled Electrical-Thermal-Mechanical Modeling of Gleeble Tensile Tests for Ultra-High-Strength (UHS) Steel at A High Temperature. Zhang Changli, Bellet M, Bobadilla M, Shen Houfa, Liu Baicheng. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41(9): 2304-2317, 2010
2.Finite Element Thermal-Mechanical Coupled Analysis of Strand Bulging Deformation in Continuous Casting. Zhang Jia, Shen Houfa, Huang Tianyou. Advanced Materials Research, 154-155: 1456-1461, 2010
3.High Temperature Mechanical Properties of Micro-Alloyed Carbon Steel in the Mushy Zone. Guo Liangliang, Li Weipeng, Bobadilla M, Yao Man, Shen Houfa. Steel Research International, 81(5): 387-393, 2010
4.闆坯結晶器電磁攪拌電磁場與流場的數值模拟. 陳榮, 沈厚發. 連鑄, (3): 1-5, 2010
5.大型鋼錠凝固過程三維數值模拟. 李文勝, 沈丙振, 周翔, 沈厚發, 柳百成. 大型鑄鍛件, (3): 1-4, 2010
6.多晶矽鑄造過程溫度場模拟仿真. 唐亞楠, 沈厚發. 系統仿真學報, 22(7): 1614-1617, 2010
7.Temperature Distribution and Dynamic Control of Secondary Cooling in Slab Continuous Casting. Guo Liangliang, Tian Yong, Yao Man, Shen Houfa. International J Minerals, Metallurgy and Materials, 16(6): 626-631, 2009
8.Water Modelling of the Level Fluctuation in Thin Slab Continuous Casting Mould. Shen Bingzhen, Shen Houfa, Liu Baicheng. Ironmaking and Steelmaking: Products and Applications, 36(1): 33-38, 2009
9.連鑄坯凝固過程熱力耦合有限元模拟. 陳永, 羅歆, 沈厚發. 鋼鐵, 44(3): 36-39, 2009
10.工藝模拟軟件在連鑄機二冷優化方面的應用. 徐光, 田勇, 沈厚發. 寬厚闆, 15(1): 37-39, 2009
11.80MN快鍛機上橫梁鑄造工藝仿真與優化. 劉豔, 周守航, 張西鵬, 韓慶禮, 石立文, 沈厚發, 李文勝. 鑄造, 58(11): 1129-1133, 2009
12.渦輪盤風冷過程數值模拟研究. 鄒金文, 劉東, 柳百成, 沈厚發. 材料工程, (10): 7-10, 2009
13.Optimization of Temperature Distribution in Thick Slab Continuous Casting for Direct Hot Rolling. Guo Liangliang, Tian Yong, Yao Man, Shen Houfa. J Iron and Steel Research International, 15(S1): 239-243, 2008
14.Study on the Control Characteristics of the Secondary Cooling System in Continuous Casting. Zhang Jia, Tian Yong, Shen Houfa, Huang Tianyou. J Iron and Steel Research International, 15(S1): 584-588, 2008
15.Analysis of Thermomechanical Behavior in Continuous Bloom Casting Mold. Chen Yong, Luo Xin, Shen Houfa. J Iron and Steel Research International, 15(S1): 322-326, 2008
16.Finite Element Numerical Simulation on Thermomechanical Couple in Bloom Mold. Chen Yong, Luo Xin, Shen Houfa. J Iron and Steel Research International, 15(S1): 302-306, 2008
17.Modeling and Simulation of the Fluid Flow in Continuous Slab Casting Mould. Liu Rui, Shen Houfa, Liu Baicheng. Revue de Metallurgie-Cahiers dInformations Techniques. 105(9): 428-435, 2008
18.Numerical Simulation of the Transient Flow Patterns of Upper Swirls in Continuous Slab Casting Moulds. Liu Rui, Ji Wei, Li Jin, Shen Houfa, Liu Baicheng. Steel Research Int, 79(8): 626-631, 2008
19.Solidification Modeling in Continuous Casting by Finite Point Method. Zhang Lei, Rong Yiming, Shen Houfa, Huang Tianyou. Int J Intelligent Systems Technologies and Applications, 4(1-2): 177-187, 2008
20.Thermomechanical Behavior in Continuous Bloom Casting with Different Mold Tapers. Luo Xin, Chen Yong, Shen Houfa. Tsinghua Science and Technology, 13(5): 598-604, 2008
21.連鑄結晶器電磁攪拌磁場及鋼液流場模拟. 陳永, 張長利, 沈厚發, 柳百成. 鋼鐵研究學報, 20(7): 11-14, 2008
22.薄闆坯連鑄工藝因素對結晶器非穩定流場特征參數的影響. 沈丙振, 沈厚發. 北京科技大學學報, 30(7): 800-804, 2008
23.連鑄結晶器内大方坯的熱力耦合分析. 陳永, 羅歆, 沈厚發. 鋼鐵, 43(3): 33-37, 2008
24.Instability of Fluid Flow and Level Fluctuation in Continuous Thin Slab Casting Mould. Shen Bingzhen, Shen Houfa, Liu Baicheng. ISIJ International, 47(3): 427-432, 2007
25.Water Modeling of the Fluid Flow Instability in Continous Thin Slab Casting Mould. Shen Houfa, Shen Bingzhen, Liu Baicheng. Steel Research Int, 78 (7): 531-535, 2007
26.Solidification Modeling in Continuous Casting by Finite Point Method. Zhang Lei, Rong Yiming, Shen Houfa, Huang Tianyou. J Materials Processing Technology, 192(SI): 511-517, 2007
27.Numerical Simulation on Solidification and Thermal Stress of Continuous Casting Billet in Mold based on Meshless Methods. Zhang Lei, Shen Houfa, Rong Yiming, Huang Tianyou. Materials Science and Engineering A, 466(1-2): 71-78, 2007
28.厚闆坯連鑄二次冷卻過程數值模拟及實驗研究. 田勇, 沈厚發, 于功利, 王仁貴, 李澤林. 連鑄, (5): 1-5, 2007
29.我國大型鑄鋼件生産的現狀與關鍵技術. 黃天佑, 劉小剛, 康進武, 沈厚發, 柳百成. 鑄造, 56(9): 899-904, 2007
27.Computational Modeling of Macroscopic Transportation in Continuous Casting. Zhang Huanxin, Shen Houfa, Liu Baicheng. Materials Science Forum, 508: 543-548, 2006
28.Lattice BGK Model Simulation of Asymmetric Flow inside a Continuous Slab Casting Mold. Zhang Xiaojun, Shen Houfa. Journal of Hydrodynamics B, 18(4): 431-35, 2006
29.鎳基高溫合金定向凝固斑點偏析數值模拟研究. 曹海峰, 沈厚發, 柳百成. 稀有金屬材料與工程, 35(12): 1849-1853, 2006
30.水口對CSP結晶器流場的影響. 李偉, 沈厚發. 鋼鐵, 41(S1): 467-471, 2006
31.薄闆坯連鑄流場特征和浸入式水口研究. 徐榮軍, 葉世鴻, 杜鋒, 沈厚發. 鋼鐵, 41(S1): 414-417？, 2006
32.薄闆坯連鑄CSP結晶器液位波動影響因素的水力學模拟研究. 沈丙振, 葉世鴻, 徐榮軍, 李永全, 沈厚發, 柳百成. 鋼鐵, 41(S1): 305-308, 2006
33.薄闆坯連鑄流場與中心偏析的大渦模拟. 張煥鑫, 沈厚發, 柳百成. 鋼鐵, 41(S1): 472-475, 2006
34.闆坯連鑄結晶器流場的格子法模拟. 張小軍, 沈厚發. 機械工程學報, 42(9): 154-159, 2006
35.配點型無網格法及其疊代求解在導熱微分方程中的應用. 張雷, 黃天佑, 沈厚發, 柳百成. 機械工程學報, (S1): 78-83, 2006
36.連鑄闆坯二冷區邊界換熱與溫度場分析. 高文江, 陶金明, 李進, 沈厚發. 冶金自動化, (S2): 29-32, 2006
37.連鑄大方坯凝固傳熱過程的數值模拟. 高文江, 趙克文, 沈厚發. 熱加工工藝, 35(17): 66-69, 2006
38.Effect of Electromagnetic Brake on Fluid Flow in Continuous Slab Casting Mould. Shen Houfa, Liu Baicheng, Wang Lei. International Journal of Cast Metals Research, 18(4): 209-213, 2005
39.Fluid Flow and Solidification in Continuous Thin Slab Casting Mold. Zhang Huanxin, Shen Houfa, Liu Baicheng. Trans Indian Inst Met, 58(4): 503-508, 2005
40.Simulation of A-Segregate Formation in Binary Alloys. Cao Haifeng, Shen Houfa, Liu Baicheng, Xu Qingyan. Trans Indian Inst Met, 58(4): 539-543, 2005
41.連續鑄造闆坯結晶器中流動與液位波動的模拟研究. 張煥鑫, 沈厚發, 柳百成. 鑄造, 54(7): 710-712, 2005
42.結晶器電磁制動鋼液流場數值模拟. 張桂芳, 沈厚發, 王鐳, 柳百成. 鑄造, 54(5): 484-487, 2005
43.薄闆坯連鑄結晶器流場模拟和驗證. 張桂芳, 沈厚發, 王鐳, 柳百成. 鋼鐵釩钛, 26(2): 31-34, 2005
44.低碳鋼奧氏體再結晶模型的建立. 沈丙振, 方能炜, 沈厚發, 柳百成. 材料科學與工藝, 13(5): 516-520, 2005
45.側向凝固通道偏析的數值模拟. 曹海峰, 沈厚發, 柳百成. 金屬學報, 41: 917-22, 2005
46.Pb-Sn合金凝固過程A偏析數值模拟. 曹海峰, 沈厚發, 柳百成. 材料研究學報, 19(6): 594-600, 2005
47.數值模拟技術在大型鑄鋼件生産中的應用. 劉小剛, 沈厚發, 康進武, 張雷, 黃天佑, 邊敦亭. 熱加工工藝, (5): 65-68, 2005
48.鎂合金表面覆蓋層形成方法及相關國家标準. 張新平, 熊守美, 沈厚發, 柳百成. 材料科學與工藝, 13(6): 627-631, 2005
49.Analysis of Solute Redistribution and Centerline Segregation in Continuously Cast Thin Slab？. Ma Changwen, Shen Houfa, Huang Tianyou, Liu Baicheng. China Foundry, 1(2): 94-98, 2004
50.Effects of Level Magnetic Field and Flow Control Electro Magnetic Brake on Fluid Flow in Thin Slab Continuous Casting Mold. Wang, Lei, Shen Houfa. Kang T'ieh/Iron and Steel, 39(S): 486-490, 2004
51.Finite Point Method for the Simulation of Solidification and Heat Transfer in Continuous Casting Mold. Zhang Lei, Kang Jinwu, Shen Houfa, Huang Tianyou. Tsinghua Science and Technology, 9(5): 570-573, 2004
52.Centerline Segregation in Continuously Cast Billets. Ma Changwen, Shen Houfa, Huang Tianyou. Tsinghua Science and Technology, 9(5): 550-554, 2004
53.Fluid Flow in Continuous Casting Mold with a Configured Nozzle. Wang Lei, Shen Houfa, Liu Baicheng. Tsinghua Science and Technology, 9(6): 617-621, 2004
54. Models of the Static and Metadynamic Recrystallization for Low Carbon Steel during Mechanical Deformation. Shen Bingzhen, Fang Nengwei, Shen Houfa, Liu Baicheng. Tsinghua Science and Technology, 9(6): 622~627, 2004
55.Numerical Simulation on Macro-segregation in Steel Ingot during Solidification. Ma Changwen, Shen Houfa, Huang Tianyou, Liu Baicheng. Acta Metallurgica Sinica, 17(3): 288-294, 2004
56.連鑄結晶器中坯殼生長有限元分析. 王哲, 沈厚發, 柳百成. 清華大學學報, 44(11): 1448-1451, 2004
57.闆坯凝固末端輕壓下流動與溶質分布的研究. 馬長文, 沈厚發, 黃天佑. 鑄造, 53(12): 1023-1027, 2004
58.方坯連鑄中心偏析的數值模拟. 馬長文, 沈厚發, 黃天佑. 鑄造, 53(8): 617-620, 2004
59.新型連鑄結晶器流場與液位波動仿真系統. 王鐳, 張煥鑫, 沈厚發？, 劉曉, 方園. 連鑄, (6): 1-4, 2004
60.連鑄輕壓下技術的機理比較. 馬長文, 沈厚發, 黃天佑. 上海金屬, 25(6): 1-5, 2003
61.等軸晶移動對宏觀偏析影響的數值模拟. 馬長文, 沈厚發, 黃天佑, 柳百成. 材料研究學報, 18(3): 232-238, 2004
62. Pb－Sn合金凝固通道偏析的實驗與數值模拟研究. 高宇, 沈厚發, 馬長文, 黃天佑. 鑄造, 53(10): 814-818, 2004
63.消失模鑄造充型凝固過程的計算機仿真. 李鋒軍, 沈厚發, 柳百成. 機械工程學報, 40(6): 81-84, 2004
64.Modeling of Level Fluctuation in Continuous Casting. Liu Xiao, Zhang Huanxin, Xu Rongjun, Li Yongquan, Shen Houfa, Liu Baicheng. J Mater Sci Technol, 19(S1): 158-160, 2003
65.Mathematical Model of Fluid Flow and Solidification in Mold Region of Continuous Slab Casting. Tan Lijian, Shen Houfa, Liu Baicheng. Tsinghua Science and Technology, 8(1): 83-89, 2003
66.Modeling of Mold Filling and Solidification in Lost Foam Casting. LI Fengjun, Shen Houfa, Liu Baicheng. J Mater Sci Technol, 19(5): 395-397, 2003
67.結晶器液位波動的模拟算法. 譚利堅, 沈厚發, 柳百成, 劉曉, 徐榮軍, 李永全. 金屬學報, 39(4): 435-438, 2003
68.薄闆坯連鑄連軋過程溫度場模拟. 張雷, 沈厚發, 黃天佑. 連鑄, (1): 29-31, 2003
69.熱軋過程金屬組織－性能模拟研究進展. 沈丙振, 沈厚發, 柳百成. 上海金屬, 25(5): 25-29, 2003
70.大型軋鋼機架鑄造工藝計算機輔助分析. 張雷, 譚利堅, 沈厚發, 黃天佑, 柳百成, 邊敦亭, 陳世文, 潘愛勝, 潘甯, 王曉光. 鑄造, 52(8): 568-570, 2003
71.定向凝固通道偏析的數值模拟. 馬長文, 沈厚發, 黃天佑, 柳百成. 清華大學學報, 43(11): 1444-1447, 2003
72.消失模鑄造充型過程的模拟方法？. 李鋒軍, 沈厚發, 柳百成. 金屬學報, 39(7): 686-690, 2003
73.消失模鑄造充型過程的人工神經網絡算法. 李鋒軍, 柳百成, 沈厚發, 禹建麗. 稀有金屬材料與工程, 32(4): 268-271, 2003
74.消失模鑄造充型過程的計算模型及實驗驗證. 李鋒軍, 沈厚發, 柳百成. 清華大學學報, 43(5): 586-589, 2003
75.消失模鑄造液态金屬充型速度的試驗研究？. 李鋒軍, 沈厚發, 柳百成, 張殿德. 材料科學與工藝, 11(3): 225-229, 2003
76.Analysis of Heat Transfer and Thermal Stress in Continuous Casting with Mechanical Reduction. Zhang Lei, Shen Houfa, Huang Tianyou, Liu Baicheng. J Cast Metals Research, 15(4): 355-359, 2002
77.An Experimental Study of Deformation of a Columnar Dendritic Mushy Zone using a Transparent Succinonitrile-Acetone Alloy. Shen Houfa, Beckermann C. Metall Mater Trans B, 33: 69-78, 2002
78.Simulation using Realistic Spray Cooling for the Continuous Casting of Multi-component Steel. Shen Houfa, Hardin RA, MacKenzie R, Beckermann C. J Mater Sci Technol, 18(4): 311-314, 2002
79.糊狀區變形及濃度再分布的模拟實驗研究. 沈厚發, Beckermann C. 金屬學報, 38(4): 352-58, 2002
80.Fe-C合金凝固過程流動、傳熱、傳質的耦合數值模拟. 韓志強, 沈厚發, 熊守美, 柳百成. 金屬學報, 38: 941-46, 2002
81.合金凝固過程傳輸模型. 韓志強, 沈厚發, 柳百成. 金屬學報, 38: 35-40, 2002
82.消失模鑄鐵件充型速度的計算及其應用. 李鋒軍, 柳百成, 沈厚發, 張殿德. 特種鑄造及有色合金, (6): 15-17, 2002
83.鑄鐵件消失模充型速度的測試及計算. 李鋒軍, 林青松, 張殿德, 沈厚發, 柳百成. 現代鑄鐵, (1): 21-23, 2002
96.面向21世紀的鑄造技術. 柳百成, 沈厚發. 特種鑄造及有色合金, (6): 11-12, 2000
97.Prevention of Macrodefects in Squeeze Casting of an Al-7Wt Pct Si Alloy. Hong CP, Shen Houfa, Lee SM. Metall Mater Trans B, 31: 297-305, 2000
98.Formation Criterion of Macrosegregation in a Squeeze Cast Al-7mass% Si Alloy. Lee SM, Shen Houfa, Hong CP. ISIJ International, 39: 1160-68, 1999
99.Prevention of Macrosegregation in Squeeze Casting of an Al-4.5 Wt Pct Cu Alloy. Hong CP, Shen Houfa, Cho IS. Metall Mater Trans A, 29: 339-49, 1998
100.耦合傳熱與流動的鋁合金鑄件充型三維數值模拟. 邱偉, 沈厚發, 高志強, 白雪峰, 柳百成. 鑄造, (4): 1-4, 1997
101.Study and Application of Mold Filling Simulation of Shaped Casting. Liu Baicheng, Qiu Wei, Shen Houfa, Gao Zhiqiang. Journal of Materials Science Technology, 13: 107-12, 1997
102.Progress in Numerical Simulation of Solidification Process of Shaped Casting. Liu Baicheng, Shen Houfa, Li Wenzhen. Journal of Materials Science and Technology, 11: 313-22, 1995